NEFF B 1325 Serie Mode D'emploi page 38

Automatic ON and OFF:
1. Press the button and set the length
g
of the desired cycle (see the example in
the illustration at right, showing 1 hour
and 30 minutes).
2. Press the button and set the end of
h
the cycle (the example in the illustration
shows 12.30 hrs.).
After the setting is completed, the
display shows the time of day and
indicates »AUTO«.
3. Select the heating system, and set the
required oven temperature.
At the pre-set time, the oven will be
automatically switched ON.
The settings can be corrected at any
time.
When the pre-set end of the timer cycle
is reached, a signal sounds and the
oven is automatically switched OFF.
To turn off the signal, briefly press the
button.
h
4. Turn the function selector and the
temperature selector switch to the
0 position.
5. The »AUTO« symbol blinks.
Important: It must be switched OFF by
pressing the button.
E
Please note:
The automatic timer is ideal for dishes
that require little attention during
cooking.
Both the alarm and the automatic timer
may be programmed up to 24 hours in
advance.
38
Electronic clock
Setting the length of timer cycle
Setting the end of timer cycle
The current settings can always be
checked by pressing the appropriate
function button.
To cancel a setting before the timer
cycle has elapsed:
Press the
in the display to 0.00.
button and reset the time
g