Maintenance - Horizon Global PRO Serie Manuel D'instructions

Handle Tab
9. AFTER MAKING CERTAIN NO ONE IS STANDING BETWEEN TRUCK AND TRAILER OR IN FRONT OF TRUCK,
drive truck slowly away from trailer.
Whenever possible, avoid putting body under trailer or between truck and trailer
If you need to place any part of our body under trailer or between truck and trailer:
•All trailer tires MUST be blocked in front and behind each tire AND
•Trailer landing gear MUST be resting on firm ground AND
•Truck MUST be stationary, in park, with emergency brake on!
10. Close locking bar by pulling handle out and back.
(Spring should close locking bar.)
11. KEEP WHEEL BLOCKS IN PLACE. This will keep trailer from moving unexpectedly.
12. Close tailgate if desired

MAINTENANCE:

1. Recheck tightness of all hardware every 1000 miles of use.
2. See "Before each trip" section in this manual.
30099IN – 15SEPT2017 E
Locking Bar
Fig. 16
WARNING
PCN8340 ©2017 HORIZON GLOBAL
Pull Handle all the
way out and
forward
B
A
Handle Groove
B
Handle
Fig. 17
Printed in XXXXX 9