Horizon Global PRO Serie Manuel D'instructions page 68

DODGE '94 to '01 1500 / '94 to '02 2500/3500 (FULL SIZE, SHORT AND LONG BOX)
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
IMPORTANT NOTES FOR THIS INSTALLATION:
1. It is very important that brackets in Row 2 are against forward side of bed sill as shown below. Due to
dimensional instability in bed sill placement with the Dodge truck, interference could result when drilling in Rows 3
or 4. May need to move base rail location +/- 1/2" to ensure frame brackets do not interfere with bed sills.
Front
of
Vehicle
NOTE:
Must install center bolt in
one of the center holes in
each rail.
Check to make sure center
bolt does not interfere with
bed sill.
King Pin Center approx. 2"
forward of Axle Center
Side Bracket
Front
of
Vehicle
Long bracket
1/4
*
1/4
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
Horizon Global America Inc. does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the
©
2006,2007,2008,2009,2010,2011,2012,2013, 2014, 2017 Horizon Global America Inc .
1.5-3
2
responsibility of the installer to prevent damage due to installation.
SHEET 13 0F 19
Made in China
CAUTION!
Axle Center
CAUTION!
30035IN
Rear Edge of
Truck Bed
32-7/16" Long Box
28-7/16" Short Box
Measure from Rear Edge of truck
bed to rear edge of base rail.
Bed Sill
Drivers side Ram 1500 Shown
Short bracket
*
Optional weld
1/4 2
*
1/4 2
1/31/2017
pattern
Rev. U