Horizon Global PRO Serie Manuel D'instructions page 64

Ford '97 to '03 F-150 & F-250 8500 GVW AND UNDER and '04 Heritage Series Body Style
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
IMPORTANT NOTES FOR THIS INSTALLATION:
1. Long and Short Brackets on Driver's Side may need to be switched to avoid interference with exhaust hanger.
2. May need to move base rail location +/- 1/2" to ensure frame brackets do not interfere with bed sills.
NOTE:
Must install center bolt in
one of the center holes in
each rail.
Check to make sure center
bolt does not interfere with
bed sill.
King Pin Center approx.. 1-1/2"
forward of axle center.
May need to move slightly to
avoid interference with fuel lines
Long bracket
Front of
Vehicle
1/4
*
1/4
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
Horizon Global America Inc. does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the
©
2006,2007,2008,2009,2010,2011,2012,2013, 2014, 2017 Horizon Global America Inc .
Front
of
Vehicle
Side Bracket
1.5-3
2
responsibility of the installer to prevent damage due to installation.
SHEET 9 0F 19
Made in China
CAUTION!
Axle Center
CAUTION!
30035IN
Rear Edge of
Truck Bed
29-1/4" Long Box
and Short Box
Measure from Rear Edge
of truck bed to rear edge
of base rail.
Bed Sill
Drivers side of F150 shown
Short bracket
*
Optional weld
1/4 2
*
1/4 2
1/31/2017
pattern
Rev. U