Horizon Global PRO Serie Manuel D'instructions page 69

Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
IMPORTANT NOTES FOR THIS INSTALLATION:
1. May need to move base rail location +/- 1/2" to ensure frame brackets do not interfere with bed sills.
Front
of
Vehicle
NOTE:
Must install center bolt in
one of the center holes in
each rail.
Check to make sure center
bolt does not interfere with
bed sill.
King Pin Centered over Axle
Side Bracket
Front
of
Vehicle
Long bracket
1/4 1.5-3
*
1/4 2
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
Horizon Global America Inc. does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the
©
2006,2007,2008,2009,2010,2011,2012,2013, 2014, 2017 Horizon Global America Inc .
DODGE THROUGH 93 (FULL SIZE)
CAUTION!
CAUTION!
responsibility of the installer to prevent damage due to installation.
SHEET 14 0F 19
Made in China
29-5/8" Long Box
and Short Box
Measure from Rear Edge of truck
bed to rear edge of base rail.
Axle Center
Bed Sill
Drivers side of 1/2 ton Ram Shown
1/4 2
1/4 2
30035IN 1/31/2017
Rear Edge of
Truck Bed
Short bracket
*
Optional weld
pattern
*
Rev. U