BH FITNESS YV25 Mode D'emploi page 12

G: Automatic program selection P1.
H: MODE-
selection.
I: Automatic program selection P2.
J: Automatic program selection P3.
Signals and Keys.-
Fig.II.-
1.-
Time indicator
2.-
Pulse rate indicator
This light flashes when it detects a
pulse rate.
3.-
Rocking vibration time
display.
Preset time of 0-20 minutes.
4.-
Heart rate display.
Shows beats per miniute.
5.-
Rocking
speed display.
Displays from H00 to H60. An H00
display indicates that rocking vibration
is at its lowest setting, ie off, whereas
H60 is the highest setting.
6.-
MODE display.
Shows the current exercise mode
being used.
7.-
Manual mode indicator.
This light flashes when manual mode
is active.
8.-
USB user program indicator.
This light flashes when a USB user
program is running.
Automatic program
vibration
9.-
P1
indicator.
This light flashes when the program is
active.
10.-
P2
indicator.
This light flashes when the program is
active.
11.-
P3
indicator.
This light flashes when the program is
active.
12.-
vibration speed.
When used with a manual program it
increases vibration speed.
The rocking speed can also be
adjusted by using the buttons on the
right handlebar (Z), Fig.3.
13.-
Platform start/stop button.
14.-
vibration time.
The time setting is increased with the
machine stopped.
The vibration time can also be
adjusted by using the buttons on the
right handlebar (Z), Fig.3.
15.-
vibration time.
The time setting is reduced with the
machine stopped.
The vibration time can also be
adjusted by using the buttons on the
right handlebar (Z), Fig.3.
12
automatic
automatic
automatic
Key to increase rocking
Key to increase rocking
Key to reduce rocking
program
program
program