Luminance Brands Kathy Ireland Home LINDBERGH ECO Manuel Du Propriétaire page 17

6.3
Engage the Fan Motor 2-Pin Wire Connector into the
2-pin Wire Connector of the LED Light Fixture Assembly
(Figure 29) .
The connection is complete when you hear a soft click .
6.4
Carefully tuck all the Wires and Connectors into the
Light Kit Adapter .
Position the LED Light Fixture Assembly onto the Light
Kit Adapter, aligning the Three Holes .
NOTE: Verify that the wires and connectors are not
trapped between the LED Light Fixture Assembly
and the Light Kit Adapter.
Install and tighten the three #6-32 x 1/4" Pan Head
Screws with Lockwashers (supplied in parts bag)
to complete the installation of the LED Light Fixture
Assembly (Figure 30) .
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the Light Kit Adapter and the LED Light
Fixture Assembly.
6. Final Assembly
(Continued)
Figure 29
LIGHT KIT
ADAPTER
Figure 30
17
LED LIGHT
FIXTURE
ASSEMBLY
#6-32 x 1/4" PAN HEAD
SCREWS
w/LOCKWASHERS (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF315