Eco-Mode - Sentiotec WORLD OF WELLNESS wave.com4 Instructions De Montage Et Mode D'emploi

Instructions for use for the user
CAUTION!
The range changes when a correction value is specified for the tempe-
rature (see „Temperature rectification"). After switching on the sauna
heater, it is heated up until the desired temperature is attained.
Ventilator
The ventilator is activated by first pressing the key
(optional humidity extension). The ventilator is deactivated again by first pressing
5
the key followed by the
TIP!
The ventilator can only be switched on or off in the temperature setting
mode.

4.7. ECO-Mode

This new ECO mode helps you to save energy. If you wish to take a break after
entering the sauna, you can now do so. Your Wave.com4 sauna control unit
with ECO function now enables you to attain this same cabin temperature again
after your break
The following functions are possible:
•
ECO20 for a 20-minute break from the sauna
•
ECO40 for a 40-minute break from the sauna
•
ECO60 for a 60-minute break from the sauna
Activate the ECO mode as follows:
Navigate to Temperature Setting in the menu (see Point 4.6 of these operating
instructions). When you are in the Temperature Setting menu, press and hold
5 6
the keys and
selection with the key
WORLD OF WELLNESS
4
key.
). Select your choice with the
7
.
6
followed by the key
. Confirm your
5 6
and
p. 21/42
4
EN