User Interface And Use Of The Display - Power One AURORA PVI-AEC-EVO Guide D'installation Rapide

C.

User interface and use of the display

The system features a 2x16 character display,four buttons for navigating menus,and three LEDs to indicate device status.
Using the display and the buttons on the front panel it is possible to perform the initial configuration of the system (check
of parameter acquisition from inverter,analog input configuration,and configuration of LAN network parameters).
For displaying the detailed parameters of the inverters and/or of the string-combs, as well as for the advanced
configurations it is necessary to access the internal web server following the procedure described in paragraph"L".
A list of functions accessible from the display is shown in the table in Appendix 3.
'Enter' button. Used to confirm an action,to access the main menu or the sub-menu corresponding to
the selected entry (indicated by the > symbol),or to go to the next digit to change.
'Down' button. Used to scroll down through the menu items, or to scroll the numerical scale in
descending order.
'Up' button. Used to scroll up through the menu items, or to scroll the numerical scale in ascending
order.
'Esc' button. Used to return to the previous menu or to return to the previous digit to change.
Access to the main menu with administrator privileges
To perform the initial configuration it is necessary to access the various display menus as administrator.
Press the 'ENTER' key (
change the value and the 'ENTER' key to confirm the value. This password gives access to all the display setting sub-
menus of the system.
Monitoring System
USE OF BUTTONS
) and insert password 0010 : To insert the password press the arrow keys (
4 - EN
) to