Power One AURORA PVI-AEC-EVO Guide D'installation Rapide page 15

PVI-AEC-EVO / PVI-AEC-EVO LIGHT
QUICK INSTALLATION GUIDE
To read the measurements of the sensors and to check their accuracy follow the instructions below:
1. Enter the main menu as administrator (See par.'C').
2. Access the menu 'CURRENT VALUES' > 'ANALOG VALUE'
analog inputs.
PVI-AEC-EVO ......
12.00.00 01/01/11
>CURRENT VALUE
SETTINGS
>T1000-INTEGR
20.0 DEGC
Note: In the following table it is reported a list of the sensor which are present in the catalogue "Power-one" .
Fortheconnectionofthesesensors,pleasemakereferencetodiagrams shown in Appendix 1.
SENSORS WITH ANALOG OUTPUTS COMPATIBLE WITH PVI-AEC-EVO (POWER-ONE CATALOGUE)
MODELL
PVI-AEC-IRR
PVI-AEC-IRR-T
PVI-AEC-RAD-13TC
PVI-AEC-RAD-13TC-T
PVI-AEC-T100-ADH
PVI-AEC-T1000-INTEGR
PVI-AEC-T1000-BOX
PVI-AEC-PYR-1300
PVI-AEC-WIND-COMPACT
PVI-AEC-WIND-DIR
Note: The system is predisposed for the connection to other sensors available: ZippZonen Pyranometer 0-
2
1600W/m and
menu pin
0***
ENTER
>ANALOG VALUE
DIGITAL VALUE
ENTER
AN1
CHANGE
INPUT
TYPE
2
Radiation sensor (W/m --> V)
Radiation sensor with integrated cell
temperature sensor (W/m
2
Radiation sensor (W/m --> V)
Radiation sensor with integrated cell
temperature sensor (W/m
Adhesive module temperature sensor
(back cell) PT100
Ambient temperature sensor connected to
PT100/0...10Vdc converter (°C --> V)
Ambient temperature sensor PT100
2
Pyranometer ( W/m --> V)
Wind speed sensor (m/s --> V)
Wind direction sensor (° --> V)
Pyranometer0-2000W/m .
. The quantity value will be displayed for each of the
DISPLAY
IDENTIFICATIONCODE
IRR
IRR-T_Irr /
2
IRR-T_Temp
/ °C --> V)
RAD-13TC
RAD-13-TC-T_Irr /
2
RAD-13-TC-T_Temp
/ °C --> V)
T100-ADH
T1000-INTEGR
T1000-BOX
Pirano_0-20mA
WIND-COMPACT
WIND-DIR
2
13 - EN
SET PIN TO 0010
NEXT
ENTER
CHANGE VALUE
DIGIT
ENTER
OPERATIVE
RANGE
0-1200 W/m
0-1200 W/m
-20 to +80 °C
0-1300 W/m
0-1300 W/m
-25 to +90 °C
-50 to +150 °C
-50 to +50 °C
-50 to +50 °C
0-1300 W/m
0 - 50 m/s
0 - 360°
2
2
2
2
2