Power One AURORA PVI-AEC-EVO Guide D'installation Rapide page 24

16. Follow the path "SETTINGS>UPGRADEFIRMWARE>UPGRADEDISPLAY"
of upgrade (few minutes).The upgrading process will be completed when the message
displayed.
17. Follow the path "SETTINGS > UPGRADE CONFIG"
minutes).The upgrading process will be completed when the message
Press ESC to exit.
18. Switch off the system,restore all connections (RS485 line(s),LAN connection,sensors),then switch on the system.
Monitoring System
press ENTER to confirm; wait the completing of upgrade (few
22 - EN
press ENTER to confirm;wait the completing
"Upgrade Success"
"UPGRADE CONFIG" will be displayed again.
will be