Pattern Combination; Correcting Distorted Stretch Patterns - Alfa 4760 Livret D'instructions

w
q
z
x
c
q
(A)

Pattern Combination

e
Machine setting
q Stitch pattern:
w Presser foot:
e Thread tension: 1 – 4
To combine 2 units of pattern #32 and one unit of
pattern #39:
z Sew pattern #32 and press the auto-lock button
x Select pattern #39. Press the auto-lock button and
q
c Machine will sew one unit of pattern #39 and stop
v Repeat steps above.

Correcting Distorted Stretch Patterns

The sewing results of the stretch patterns may vary
depending upon the sewing conditions, such as
sewing speed, type of the fabric, number of layers
etc.
w
Always test sew on a scrap piece of the fabric that
you wish to use.
If stretch stitch patterns are distorted, correct it with
the feed balancing dial.
e
Example: Pattern #11
(B)
(A) If the pattern is compressed, turn the feed
(B) If the pattern is drawn out, turn the feed
82
#32 and #39 (example)
Satin stitch foot F
while sewing the second unit.
The machine will stop automatically when the
second unit is completed.
q Auto-lock button
start sewing.
automatically.
q Feed balancing dial
w Neutral position
e Setting mark
balancing dial in the direction of "+".
balancing dial in the direction of "–".