Pneumatic Connections - EKOM DK50 2V/50 Manuel De L'utilisateur

PNEUMATIC CONNECTIONS

Connecting to the compressed air outlet
 Route the pressure line from the compressed air outlet (1) on the
compressor to the device.
 Route the pressure hose through the opening in the rear wall of the
cabinet for cabinet-mounted compressors.
Connecting the cabinet pressure gauge to the compressor
 Remove the threaded plug (1) from the pneumatic block on the compressor.
 Connect the cabinet pressure gauge hose (3) to the threaded fitting (2).
Fig.8
DK50 2V/50S
DK50 2V/50S/M
Connecting the condensate vessel
 Connect the drain hose (1) to the condensate vessel on compressors with dryers.
 Route the hose (1) through the opening in the rear wall of the cabinet for compressor models
with a dryer and connect it to the vessel.
NP-DK50 2V 50, 2x2V 110-27_12-2021-MD -32-
DK50 2V/50
DK50 2x2V/110
1
DK50 2x2V/110S
DK50 2x2V/110S/M
Fig. 7
12/2021