Automatic Taring - KERN and SOHN PLJ-GM Mode D'emploi

 Enter the reference weight using
 Confirm by pressing
 Place the test weight, the weight is displayed in percent

8.11 Automatic taring

This function is to be used for faster calculation of the net weight, in case the tare
load changes for each weighing.
Operation:
 Selection of menu item P4 Func
TARE
 Press
TARE
 Press
, the menu item set as last flashes
 Press
repeatedly until „AtAr" is displayed flashing
TARE
 Press
F
 Press
repeatedly until "SAVE?" appears
 Confirm by pressing
F
 Press
, place the weighing container, „------„ will be
displayed briefly, then the balance changes automatically
to the „0.0" display and „NET" will be displayed
 Place test item in weighing container, net weight value will
be displayed.
PLJ-GM-BA-e-1614
and
PRINT
, „0.0" appears
PRINT
, „0.0" appears
TARE
40.0 %
0.0 g
20.0 %
Display:
P4 Func
4.1.FFun
PcS
(Example)
AtAr
4.1.FFun
SAVE?
0.0 g
g
0.0
41