Tolerance Weighing - KERN and SOHN PLJ-GM Mode D'emploi

8.9 Tolerance weighing

For tolerance weighing compare the current weight value to a lower and upper limit.
These limits must have been stored beforehand.
When placing for instance ready-made packaging, it will be shown whether the
weight is within the allowable tolerance.
Operation:
 Selection of menu item P4 Func
TARE
 Press
TARE
 Press
anew the menu item set as last flashes
 Press
repeatedly until „HiLo" is displayed flashing
TARE
 Press
F
 Press
repeatedly until "SAVE?" appears.
 Confirm by pressing
F
 Press
, „00000.0" appears, the first digit flashes and
„Min" is displayed
 Enter the minimum weight using
PRINT
 Press
, „00000.0" appears, the first digit flashes and
„Max" is displayed
 Enter the maximum weight using
38
PRINT
, „0.0" appears
and
and
TARE
TARE
PLJ-GM-BA-e-1614
Display:
P4 Func
4.1.FFun
PcS
(Example)
HiLo
4.1.FFun
SAVE?
0.0 g
00000.0
2.0 g
(Example)
00000.0
10.0 g
(Example)