Confirm by pressing
displayed
Place the test items, the entered tolerance range is
displayed by „Min", „OK" and „Max"
The value entered for the upper tolerance limit must be greater than the lower
tolerance value. Error message –Lo- appears on the display and the display returns
to weighing mode.
8.10 Percent determination
Percent determination allows weight display in percent, in relation to a reference
weight.
8.10.1 Determination of the reference weight by weighing
Operation:
Selection of menu item P4 Func
TARE
Press
TARE
Press
, the menu item set as last flashes
Press
repeatedly until „HiLo" is displayed flashing
TARE
Press
F
Press
repeatedly until "SAVE?" appears
Confirm by pressing
F
Press
, „0.0" appears and % is displayed flashing
PLJ-GM-BA-e-1614
PRINT
, „0.0" appears and „Min" is
PRINT
, „0.0" appears
0.0 g
Display:
P4 Func
4.1.FFun
PcS
(Example)
PrcA
4.1.FFun
SAVE?
0.0 g
%
0.0
39