Input Minimum Weight For Some Functions - KERN and SOHN PLJ-GM Mode D'emploi

Meaning of settings:
StAb data output for stable weighing value (PRINT key)
rEPL automatic output function (See chpt. 9.5)
CntA continuous output in standard weighing unit
Cntb continuous output in current weighing unit

9.3 Input minimum weight for some functions

The minimum weight affects the following functions:
Automatic taring: In order to apply this function, the weight of the weighing plate
must have dropped below the entered weighing value first, before another greater
weight can be tared automatically.
Automatic output function: If the current weighing value exceeds the entered
weighing value, a weighing value will be issued automatically. The next weighing
value will not be issued unless the weighing value has meanwhile dropped below the
entered weighing value.
Operation:
Selecting the menu item
TARE
Press , „2.1.Pr_n" will be displayed
Press , „2.2.S.Lo" will be displayed
TARE
Press , the value entered as last is displayed, the first
digit flashes
Enter the minimum weight using
PRINT
Press the button, the minimum weight will be imported.
F
Press repeatedly until "SAVE?" appears
PRINT
Acknowledge by
48
and
, „0.0"
TARE
PLJ-GM-BA-e-1614
Display:
P2 Prnt
2.1. Pr_n
2.2. S_Lo
0010.00g
(Example)
0030.00g
(Example)
2.2. S_Lo
SAVE?
0.0 g