La batterie ne charge pas
Procédure de dépannage :
Remove front shroud on unit to
access DC power connections
on inverter.
Remove paint bucket tray to
access fuse and battery.
Remove inverter access panels
to see circuit breakers and
status center lights.
Check wiring from charging
socket to relay board and
from relay board to inverter.
Does light 6 and 8 illuminate
on power center?
Problem fixed.
NO
See Step 5 on page
33. Put a jumper wire
across inverter input.
Does light 6 and 8
illuminate?
NO
Replace inverter
control boards.
See Manual
3A4746.
3A4604B Fonctionnement, réparation, pièces
See Step 4 on page 33.
10.0 volts or higher?
Plug in wall power to charging
port. Does light 6 and 8
illuminate on power center?
NO
Check charger circuit
breaker. Is it in tripped
YES
YES
Reset circuit
breaker.
Check wiring
for any shorts
NO
YES
Set to position 3.
Replace relay
board. See
parts list.
Replace inverter control boards.
Do you have
YES
Do you have 10.0 volts or higher?
YES
position?
Trickle charge the battery
NO
with an external charger
or replace battery.
Check battery selector
by status center. Is it
set to position 3?
YES
Are all power wires
securely assembled to inverter?
YES
See Manual 3A4746.
Is Fuse
YES
NO
blown?
NO
Replace
fuse.
Tighten all battery
cable connections.
See Step 4 on page 33.
YES
NO
Problem
fixed.
NO
Assemble wires.
Dépannage
ti30338a
37