Husqvarna TE 250 2009 Livret D'utilisation Et D'entretien page 171

MUM2-250_310_450_510_2009_GB
Pull the lamp (3) inside, turn it counterclockwise then remove it
from the lamp holder.
After replacement, reverse operations for reassembly.
NOTES: make sure not to tighten the
screws excessively.
21-05-2008 9:39 Pagina 79
REPLACING THE NUMBER PLATE LAMP
(TE- SMR)
Pull out the number plate lampholder (4) from the back of the
vehicle. Pull out the lampholder and the bulb. Rotate the bulb
(5) to remove from the lampholder.
Once the bulb has been replaced, reverse the above procedure.
4
5
79