Husqvarna TE 250 2009 Livret D'utilisation Et D'entretien page 150

MUM2-250_310_450_510_2009_GB
To replace the fluid, proceed as follows:
- Remove the rubber cap on the bleeding valve (1) or (1A).
- Attach a clear plastic hose to the bleeding valve on the brake
caliper and turn the other end of the hose into a container.
- Remove fluid reservoir cap (2)or (2A: 21 mm wrench) and the
rubber.
- Loosen bleeding valve on the brake caliper.
58
21-05-2008 9:37 Pagina 58
1
1A
TE-TC-TXC
SMR