Husqvarna TE 250 2009 Livret D'utilisation Et D'entretien page 152

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

MUM2-250_310_450_510_2009_GB
WARNING!
Brake fluid quickly ruins painted surfaces;
any spilled fluid should be completely
wiped up immediately.
* Brake fluid may cause irritation. Avoid
contact with skin or eyes. In case of con-
tact, flush thoroughly and call a doctor if
your eyes were exposed.
Periodically check the connecting hoses
(see "Periodical maintenance card"): if the
hoses (A) and (B) are worned or cracked,
their replacement is advised.
A
60
21-05-2008
9:37
Pagina 60
FRONT BRAKING SYSTEM BLEEDING
(TE, TC, TXC)
The braking system must be bled after the fluid replacement or
when, due to air in the circuit, the lever stroke is long and
spongy.
Proceed as follows:
- Remove the rubber cap on the bleeding valve (1).
- Attach a clear plastic hose to the bleeding valve on the brake
caliper and turn the other end of the hose into a container
(make sure that the end of the hose is submerged in brake flu-
id during the entire bleeding operation).
B
TE-TC-TXC
1

Publicité

Table des Matières
loading

Table des Matières