Husqvarna TE 250 2009 Livret D'utilisation Et D'entretien page 147

MUM2-250_310_450_510_2009_GB
PADS CLEANING
Be careful that no disc brake fluid or any oil gets on brake pads
or discs. Clean off any fluid or oil that inadverently gets on the
pads or disc with alcohol.
Replace the pads with new ones if they cannot be cleaned satis-
factorily.
PADS INSTALLATION
- Install new brake pads.
- Reassemble the two pins (2) and the springs (1).
1
21-05-2008 9:37 Pagina 55
WARNING!
Do not attempt to ride the motorcycle until
the brake lever or pedal are
fully effective. Pump the brake lever or
pedal until the pads are against the discs.
The brake will not function on the first ap-
plication of the lever or pedal.
TE-TC-TXC SMR
FRONT
FRONT
2
2
1
REAR
55