Husqvarna TE 250 2009 Livret D'utilisation Et D'entretien page 159

MUM2-250_310_450_510_2009_GB
OVERHAULING THE WHEELS
The tables hereunder show the type of control the rim and wheel
axle are to be submitted to.
Note*: if the rim is badly, it should be re-
placed.
21-05-2008 9:38 Pagina 67
DEFORMATION RIM
Side skid
Eccentricity
WHEEL RIM AXLE BENDING
If the bending figure is over the allowable max. limit, straighten
or replace the axle.
If the wheel axle cannot be straightened within the max. limits
(0,2 mm - 0,008 in.) stated, replace it.
WHEEL SPOKES
Check to make sure that all the nipples are tight; tighten them if
necessary.
STANDARD MAX.LIMIT
Remember that an insufficient stretch jeopardizes the motorcycle
stability.
less than 0,5 mm
For an instant check, use a metal point (for instance, a screwdriv-
(0.02 in)
er) to beat the spokes with. A live sound accounts for an accurate
2 mm
tightening, while a dull sound means that a new tightening is
(0,078 in)
less than 0,8 mm
necessary.
(0.03 in)
67