Operation with recirculated air
One active charcoal filter is needed for this and can be obtained from your usual retailer.
The filter removes the grease and smells from the extracted air before sending it back into the
room through the upper outlet grid.
A active charcoal filter will last for about four months. It cannot be cleaned or reconditioned.
Mounting and replacing the active charcoal filter:
•
Disconnect the hood from the electricity.
•
Remove the metal grease filters. Diagram 5.
Remove the metal grease filters using the handles designed
for this purpose by pulling the filter backwards and then
downwards. Diagram 6.
•
Insert the filter "C" using the "B" knobs (Diagram 6);
•
Refit the the metal grease filters.
20
B
Diagram 6
f1
f2
Diagram 5
C