Cleaning the grease filters
The grease filter captures the greases from the cooking
f1
fumes.
The filter is in layers of stretched aluminium Its life is
nearly unlimited.
At more or less frequent intervals, according to the use
of the hood, in any case at last once every 30 days of
normal use, wash the filter in a dishwasher or in a soapy
water.
f2
When washed in a dish washer, the grease filter may
discolour slightly, but this does not affect its filtering
Diagram 9
capacity.
Remove the metal grease filters using the handles
designed for this purpose by pulling the filter backwards
and then downwards. Diagram 9.
Let the metal grease filters dry without damaging it
before putting it back into place.
Replacement of Active Charcoal filter:
It should be changed every four months in normal use.
The active charcoal filter cannot be washed nor regenerated, it must be replaced.
To fit or replace, see page 20.
Important
The manufacturers do not accept responsibility for any damage to the motor or for fires because
of failure to perform maintenance operations as prescribed in these instructions.
23