Technical Characteristics; Electrical Connection - SCHOLTES HD 79 Instructions Pour L'installation Et L'emploi

Technical Characteristics

Models ................................................................... HD 79
Dimensions (in mm)
Width .................................................................................... 898
depth ..................................................................................... 500
height (min./max.) ................................................................. 780/1190
Ø of exhausting connection ................................................ 150
Weight (in kg) ....................................................................... 19,8
Absorption (in watts - 220-240 V ~ 50Hz)
Rated absorption ................................................................... 215
Motor absorption .................................................................. 175
Lighting absorption (Halogen lamp) ................................... 2 x 20
Metal grease filter
Aspiration area (in cm

Electrical connection

Warning: This appliance must be earthed.
Before installing the hood, it is vital to ensure that the mains voltage corresponds to the voltage
indicated on the unit's data plate.
Only an authorised electrician should connect the unit to the mains power supply.
The unit is fitted with an electrical supply chord in compliance with European standards.
Attention: if the appliance is permanently connected to the mains, the plug supplied must be
removed and safely disposed of. The appliance must then be fitted with a bipolar switch in
compliance with current regulations and have a minimum contact break of 3 mm.
The manufacturer will not be held liable for any problems caused by the user's failure to observe
the above instructions.
14
2
) ......................................................... 917