Operation; Controls - SCHOLTES HP 96 IX Mode D'emploi

Operation

Controls

GB
Key A
Turns the lights off.
Key B
Turns the lights on.
Key C
Reduces the motor speed until reaching minimum. If
pressed for about 2", it stops the motor and storse the
speed.
Key D
Drives the motor (calling the last speed used) and
increases the speed until reaching maximum.
Filter alarm
Displayed for 30" when the motor is off:
After 30h of operation, the central segment lights up on the display; It indicates that the grease filters need to be
cleaned.
After 120h of operation, the central segment flashes on the display; It indicates that the grease filters need to be
cleaned and the charcoal filters replaced.
After cleaning the grease filters (and/or replacing the charcoal filters), restart the hour counter (RESET) by pressing
the key E during display of the filter alarm.
14
B
A C D
L
Display L
- signals the running speed.
- signals the filter alarm (with motor off) by displaying the
central segment for 30".
- signals Timer activation with a flashing number.
Key E
Activates the TIMER (when the motor is running), so
that the hood stops automatically after 5'. Also Zero-
sets hour metering when the Filter Alarm is active (motor
OFF).
E