REAR SHOCK ABSORBER INSPECTION
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
11 clicks out
* 8 clicks out
** 12 clicks out
* For EUROPE
** For AUS, NZ and ZA
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
3. Install:
• Rubber cap
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
• Swingarm smooth action
Abnormal
Grease the pivoting points or repair the
pivoting points.
Damage/oil leakage → Replace.
3 - 38
INSP
ADJ
noise/unsmooth
action
→