Hammam/Turkish Bath" Button; Aromatherapy And Essential Oils - effegibi H-Large Manuel D'utilisation Et D'entretien

H LARGE / H MEDIUM / H SMALL OPERATING AND MAINTENANCE MANUAL
4.4

"HAMMAM/TURKISH BATH" BUTTON

Press the "HAMMAM/TURKISH BATH" button to start generating steam.
Steam will start coming out after about 15/20 minutes (the exact time depends on the electric power and the
position of the Aquasteam generator).
PLEASE NOTE:
If you press the "HAMMAM/TURKISH BATH" button while it is functioning, this will interrupt steam
emission.
PLEASE NOTE:
The "Hammam/Turkish bath" boiler switch-off function immediately stops steam production.
If the Hammam is not started up after 30 minutes, the generator will switch to boiler-empty mode, otherwise,
if the boiler is still full and hot, pressing the "Hammam/Turkish bath" button will produce steam in a short time.
DO NOT CUT OFF THE ELECTRIC POWER TO THE GENERATOR for about an hour after steam emission
has been interrupted.
4.5

AROMATHERAPY AND ESSENTIAL OILS

All steam generators for Effegibi Hammams are specially designed to take essential
oils, enabling you to enjoy the aromatherapy experience in your own Turkish bath.
The Aquasteam have small removable holders for essential oils on the lower part of
the generator.
Once you have added a few drops of your chosen oil, the steam picks up its fragrance
in precisely the right dosage which then permeates throughout your Hammam.
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or
when it starts working for the first time, before it emits steam, the Aquasteam generator
will automatically clean the boiler, a process that takes about 15 minutes.
The temperature setting button will flash to indicate this phase.
after steam emission has been interrupted for about 30 minutes, the Aquasteam smart
electronic system automatically switches to the
boiler empty and clean function, a feature that enables the generator to work for a long
time without the need for any maintenance.
This operation takes about 15 minutes and leaves the Aquasteam generator clean and
ready for the next use.
During automatic rinsing, the temperature setting button will flash.
replace this manual.
EN
35