Hammam/Turkish Bath" Button; Aromatherapy And Essential Oils - effegibi Nuvola Touch Manuel D'utilisation Et D'entretien

NUVOLA TOUCH OperATiNg ANd mAiNTeNANCe mANUAL
4.4 "HAmmAm/ TUrKiSH BATH" BUTTON
press the "Hammam/Turkish bath" button to start generating steam.
Steam will start coming out of the diffuser inside the Hammam/Turkish bath after about 15/20 minutes (the
exact time depends on the electric power and the position of the Nuvola generator).
PLEASE NOTE:
If you press the "Hammam/Turkish bath" button while it is functioning, this will interrupt steam emission.
PLEASE NOTE:
The "Hammam/Turkish bath" boiler switch-off function immediately stops steam production.
If the Hammam is not started up after 30 minutes, the generator will switch to boiler-empty mode, otherwise,
if the boiler is still full and hot, pressing the "Hammam/Turkish bath" button will produce steam in a short time.
DO NOT CUT OFF THE ELECTRIC POWER TO THE GENERATOR for about an hour after steam emission
has been interrupted.
4.5

ArOmATHerApY ANd eSSeNTiAL OiLS

All steam generators for Effegibi Hammams are specially designed to take essential oils,
enabling you to enjoy the aromatherapy experience in your own Turkish bath.
Nuvola Touch features a cylinder-shaped steam diffuser with a small cavity into which essential
oils can be put. Once you have added a few drops of your chosen oil, the steam picks up
its fragrance in precisely the right dosage which then permeates throughout your Hammam.
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or replace this manual.
when it starts working for the first time, before it emits steam, the Nuvola generator will
automatically clean the boiler, a process that takes about 15
The temperature setting button will flash to indicate this phase.
after steam emission has been interrupted for about 30 minutes, the Nuvola smart
electronic system automatically switches to the boiler empty and clean function, a
feature that enables the generator to work for a long time without the need for any
maintenance.
This operation takes about 15 minutes and leaves the Nuvola generator clean and
ready for the next use.
During automatic rinsing, the temperature setting button will flash.
minutes.
eN
35