EN
Once the ECC - Effegibi Comfort Control function has been activated, the product can be programmed
remotely using the Effegibi Experience app.
This app makes it possible to pre-programme the product to switch on and off remotely.
To deactivate the ECC - Effegibi Comfort Control function, just repeat the procedure shown in previous figures.
When the ECC - Effegibi Comfort Control icon disappears, the function has been deactivated.
N.B.: the ECC - Effegibi Comfort Control function cannot be activated if remote activation is operated by
cable.
If the product is in a public place or if the remote activation has to be operated by cable, contact an approved
service centre or the company direct.
10.2
PROGRAMMING
The Effegibi Experience app makes it possible to programme the sauna and/or the Hammam/Turkish bath to
switch on at a precise time on a particular day of the week.
At 3.00am on the day for which program was set, the control panel will switch on and the function program-
med, sauna or Hammam/Turkish bath, will be signalled by the relevant button starting to flash, as shown
below.
If a program is set for the same day, the button will start flashing immediately.
LOGICA TWIN
64
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or
LOGICA OPERATING AND MAINTENANCE MANUAL
replace this manual.