Service Access - Jacuzzi Designer Directives D'installation & D'utilisation

U FRAME SKIRT MOUNTING DETAIL
FINISHING
SECURE SHELL
MATERIALS
CLIP UNDER
CENTER BATH RIM
(Optional)
SKIRT
PANEL
SECURE BOTTOM OF FRAME TO FLOOR

Service Access

For partially or fully sunken installations, allow for access to ser-
vice connections. It is the installer's responsibility to provide suffi-
cient service access. The recommended minimum dimensions al-
lowable for service to the bath are shown in the "Service Access"
illustration.
Provide adequate ventilation (minimum 30 square inch opening)
for cooling the motor and to supply sufficient air for the jets.
SERVICE ACCESS
(WITHOUT SKIRT)
PREFERRED
12"
ACCESS
18"
FILLER
CAULKING
BEAD
SKIRT
FRAME
12"
18"
ALTERNATE
MOTOR
ACCESS
SKIRT OPENING DIMENSION-FIORE & VERONA
TRIMMED
BATH RIM
VERONA-18",
FIORE-19" TO
SUB-FLOOR
Service Access with Skirt
An optional skirt fits along the side of the bath for above-floor in-
stallations and is also an access panel for servicing. Allow a space of
at least 8 inches away from the bath for skirt removal.
The skirt is designed to accommodate the added height of the tile,
linoleum, or other floor coverings up to 3/4 inches above the floor,
and will be flush with the floor when installed.
More detailed instructions on skirt installation are provided with
the optional skirt assembly.
SERVICE ACCESS
(CORNER BATHS)
10
18"