Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Align the EV400 to the mounting screws and gently slide the unit down to secure it within the rear mounting slots.
Plug the EV400 into the appropriate, existing power receptacle.
NOTE: The EV400 has 4 radiased corner standoffs
that must be touching the wall-mounting surface to
assure stability. Tighten the 2 mounting screws as
needed to accomplish this.
Installation and Operating Instructions | Bosch™ EV400 Series Charging Station | 15 | en
REV E | 02.19.2019
Publicité
Chapitres
Table des Matières
Dépannage
