Selecting The Input Mode - Yamaha RX-V459 Mode D'emploi

USING OTHER FEATURES
y
"NIGHT:CINEMA" and "NIGHT:MUSIC" adjustments are
stored independently.
Notes
• You cannot use the night listening modes in the following
cases:
– when the "DIRECT STEREO" mode (see page 37) is
selected.
– when the component connected to the MULTI CH
INPUT jacks is selected as the input source (see
page 36).
– when headphones are connected to the PHONES jack.
• The night listening modes may vary in effectiveness
depending on the input source and surround sound settings
you use.

Selecting the input mode

This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
y
You can adjust the default input mode of this unit by using the
"INPUT MODE" parameter in "INPUT MENU" (see page 74).
Notes
• To play DTS-encoded DVDs and CDs, (when using a digital
audio connection), be sure to set "INPUT MODE" to "DTS".
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding depending
on the player even if you make a digital connection between this
unit and the player.
1
Rotate the INPUT selector on the front panel
to select the desired input source.
32
INPUT
2
Press INPUT MODE on the front panel
repeatedly to select the desired input mode.
INPUT MODE
Available input sources
DVR V-AUX
SP
A
DVD
Currently selected
input source
AUTO
Automatically selects input signals in
the following order:
1) Digital signals
2) Analog signals
DTS
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG
Selects only analog signals. If no
analog signals are input, no sound is
output.
Notes
• When "INPUT MODE" is set to "AUTO", this unit
automatically switches to the appropriate decoder if a
Dolby Digital or DTS signal is detected.
• We recommend setting "INPUT MODE" to "AUTO" in
most cases.
pDVD
DTV/CBL MD/CD-R TUNER CD
VOLUME
AUTO
L
Currently selected
input mode
dB
R