Option Menu - Yamaha RX-V459 Mode D'emploi

3 OPTION MENU

Use this menu to adjust the optional system parameters.
Display settings
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Control step: 1
• Press j to make the front panel display dimmer.
• Press i to make the front panel display brighter.
Memory guard B) MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
• Select "OFF" to turn off the "MEMORY GUARD"
feature.
• Select "ON" to protect:
– DSP program parameters
– All "SET MENU" items
– All speaker levels
Note
When "MEMORY GUARD" is set to "ON", you cannot select
and adjust any other "SET MENU" items.
Parameter initialization
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound
program that you want to initialize.
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE THEATER, STANDARD
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
"MEMORY GUARD" is set to "ON".
A)DISPLAY SET
C)PARAM. INI
field
Zone set
D)MULTI ZONE
Use this feature to specify the location of speakers
connected to the SPEAKERS B terminals of this unit.
Speaker B setting SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select "FRONT" to turn on or off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main zone.
• Select "ZONE B the speakers connected to the
" if
SPEAKERS B terminals are set in another zone. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers in the main zone are muted
and this unit outputs sound at the SPEAKERS B
terminals only.
Notes
• If you connect headphones to the PHONES jack of this unit, the
sound is output from both headphones and the SPEAKERS B
terminals when "SP B" is set to "ZONE B".
• If a DSP program is selected when "SP B" is set to "ZONE B",
this unit automatically enters the Virtual CINEMA DSP mode
(see page 41).
SET MENU
75