4
CONTROLS
4.3
OPERATOR ALERTS_______________________________________________________
The machine monitors vital machine systems. It uses an
audible alarm and warning lights to alert the operator of
conditions requiring immediate action. When an alert
occurs, follow the general guidelines listed in the chart
below, and any specific actions outlined by the grounds
superintendent or service manager.
Alert
1. Engine Oil Pressure - Oil pressure
light comes on. Oil pressure low.
2. Engine
Coolant
Alarm
sounds.
Engine
temperature high.
3. Hydraulic fluid level - alarm
sounds and hydraulic fluid
warning
light
Hydraulic
fluid
recommended level.
GB-10
Stop tractor immediately, lower implements and shut off engine! Inspect oil
level in engine. If oil light remains on with oil at proper level, shut off engine and
tow or trailer tractor back to a service area. NEVER operate engine with oil light
on, severe damage to the engine can occur.
Temperature
Stop tractor immediately, lower implements and shut off engine! Remove
coolant
debris such as leaves and grass clippings that may be restricting air flow through
front screen and area between radiator and oil cooler. If engine continues to run
hot, return tractor to a service area.
CAUTION: Engine coolant is under pressure. Turn engine off and allow
!
fluid to cool before checking fluid level or adding coolant to radiator.
Stop tractor immediately, lower implements and shut off engine! Visually
inspect tractor for obvious signs of leaks around connections, hoses and
hydraulic components. Return tractor to service area for maintenance.
comes
on.
CAUTION: Hydraulic fluid is under pressure. Turn engine off and allow
is
below
!
fluid to cool before checking fluid level or adding oil to hydraulic tank.
To test alarm system:
Turn ignition switch to RUN. Engine oil light will come on for
one second or more.
This system monitors:
1.
Engine oil pressure
2.
Engine coolant temperature
3.
Hydraulic oil level
Action