Reloop RMP-2.5a Mode D'emploi page 24

OpEratION MaNuaL
CautION!
For your own safety, please read this operation manual carefully before initial operation! all per-
sons involved in the installation, setting-up, operation, maintenance and service of this device
have to be appropriately qualified and follow this operation manual in detail. this product complies
with the requirements of the applicable European and national regulations. Conformity has been
proven. the respective statements and documents are deposited at the manufacturer.
Congratulations on purchasing your Reloop RMP-2.5 cross media player. Thank you for placing
your trust in our disc jockey technology. Before operating this equipment we ask you to carefully
study and follow all instructions.
Please remove the RMP-2.5 Alpha from its packaging. Before initial operation make sure that the
device did not suffer any visible damage during transport. If you detect any damage to the power
cable or the casing, do not operate the device. Contact your specialised dealer.
SaFEty INStruCtIONS
CautION!
please exercise particular caution when handling 100-240 V, 50/60 Hz power voltage. this vol-
tage rating may lead to a critical electric shock! any damage caused by the non-observance of
this operation manual excludes any implied warranty claims. the manufacturer is not liable for
any damage to property or for personal injury caused by improper handling or nonobservance of
the safety instructions.
- This device left the works in perfect condition. To maintain this condition and to ensure a risk-
free operation the user has to follow the safety instructions and warnings contained in this
operation manual.
- For reasons of safety and certification (CE) the unauthorised conversion and/or modification of
the device is prohibited. Please note that in the event of damage, caused by manual modification
to this device, any implied warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the excepti-
on of wear parts that can be exchanged from the outside. Qualified staff has to carry out mainte-
nance, otherwise the implied warranty does not apply!
- Ensure that power is only supplied after the device has been fully set up. Always plug in the
mains plug last. Ensure that the mains switch is in the „OFF" position when connecting the de-
vice to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened
and correctly hooked up. Refer to your dealer if you have any questions.
- When setting up the product make sure that the mains cable is not squashed or damaged by
sharp edges.
- Prevent the mains cable from coming into contact with other cables! Exercise great care when
handling mains cables and connections. Never touch these parts with wet hands!
- Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to
be used is a supply outlet in accordance with specifications of the public supply network.
- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to
hold the mains plug by the body. Never pull the mains cord!
- Position the device on a horizontal and stable low-flame base.
- Avoid any concussions or violent impacts when installing or operating the device.
- When selecting the location of installation, make sure that the device is not exposed to excessive
heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your own
safety and that of others!
- Do not place any containers filled with liquid that could easily spill on the device or in its imme-
diate vicinity. If, however, fluids should access the inside of the device, immediately disconnect
the mains plug. Have the device checked by a qualified service technician before re-use. Damage
caused by fluids inside the device is excluded from the implied warranty.
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5°
C) conditions. Keep the device away from direct exposure to the sun and heat sources such as
radiators, ovens, etc. (even during transport in a closed vehicle).
- The device must not be operated after being taken from a cold environment into a warm environ-
ment. The condensation caused hereby may destroy your device. Do not switch on or operate the
device until it has reached ambient temperature!
24