Publicité
Les langues disponibles
Les langues disponibles
trOuBLESHOOtING
If you should encounter any kind of trouble with the RMP-2.5 please check the following chart for
corrersponding symptoms and follow the instructions that are listed.
Symptoms
Possible cause
There is no power
Poor mains plug connection.
when activating the
ON/OFF button.
The CD does not
The CD has been inserted
start playback.
upside down or it is soiled.
No sound.
Output cable is connected
wrongly or not connected at
all, wrong amplifier or mixing
console operation.
CD is skipping.
The CD player is continuously
exposed to vibrations and
shocks for longer than 10
seconds.
Humming noise.
Loose cable connections.
tECHNICaL INFOrMatION
Global Distribution GmbH did not check the following manufacturer's data for plausibility and accuracy:
Frequency response:
CD 17 Hz – 20 kHz +/- 1dB / USB: 17 Hz – 16 kHz +/-1 dB
Channel separation:
83 dB
S/N ratio:
90 dB
D/A converter:
8-fold/1 Bit
MP3 Formats:
MPEG 1 Layer 3 standard
MPEG 2 Layer 3 standard
MPEG 2.5 Layer 3 standard
Maximum MP3 folders:
CD MP3 255 / USB 999
Maximum MP3 files:
CD MP3 255 / USB 999
Power Source:
AC100 – 240V, 60/50 Hz, 12W
Dimensions:
322 x 112.6 x 340.5 mm
Weight:
3.7 kg
Subject to technical alterations!
Illustrations similar to original product!
Misprints excepted!
Corrective Measures
Check the mains plug connection.
Insert the CD with the label showing
upward, clean the CD.
Check the output cords' connections and
the settings of your amplifier and mixer
respectively.
Install your system in another location.
Check all sound plugs.
and now have fun with your reloop!
Reloop - Solutions for DJs
Global Distribution GmbH
Schuckertstraße 28
48153 Muenster, Germany
Fax +49.251.6099368
www.reloopdj.com
45
Publicité
