AMIX SNA 60 Manuel D'utilisation page 63

Events possible on SNA 60 :
A / Event embedded on printer or on software .

System initialization

Equipment power supply cut

Hood opening

Hood Closing

Sensor link problem

End of sensor link problem

Sensor level problem

10s power cut

Final power cut activated

End final power cut

Standardization carried out

Windows opening

Window closing

Settings Modification
 C
onfiguration Modification

Automatic time change
B / Events displayed on SNA60 screen
 10s power cut
 Final power cut activated

Sensor link default
 Transmission to PC
AMIX
ANNEX 3: ERROR MESSAGES RECAP

event occurring during power on.

event occurring during power cut.

event occurring when opening one of the two hoods.

event occurring when closing one of the two hoods.

event occurring when a default is detected on the sensor link (broken wire, disconnected
plug...).

event when the sensor is coming back to normal.

event occurring when the sensor test level is different of the calibration one
(sensor masked ...)
 event occuring after a 10s power cut because of an overflow.
 event occurring after a final power cut because of an overflow.
 event occurring when the system is reset after a final power cut.
 event occurring when standardization procedure has been carried out (To bring into at
least once per year).

occurs when a door or window is open.

occurs when a door or window is closed.

occurs when an internal parameter is modified

occurs when an historic or analysis filter is modified

occurs after an automatic time change of the equipment.
 event occuring after a 10s power cut because of an overflow.
 event occurring after a final power cut because of an overflow.

occurs on a sensor link default (broken wire, disconnected plug ...).
 event occurring after a transmission to PC.
31
.
.
SNA 60