AMIX SNA 60 Manuel D'utilisation page 54

FUNCTIONING RESTORATION MODE AFTER SWITCH OFF
At the last hour of functioning, if the level Leq overflew the defined threshold at least three times, the system switches general
.
power cut. The alarm goes off and only one external action can reset the device (power cut management prohibited).
For this, you can follow instructions below :
1 - Open the upper plexiglas hood.
2 - Enter code Priority 2.
using of numerical
3 - Close the hood and undermine it
4 - The equipment is working again.
Remarks :

If the code entered is not valid, the system allows you to renew your entry.

When SNA60 asks you to enter the code number of Priority 2
correspondent By sending this code, we will be able to give you the code associated Priority 2.

At any time when entering your code, press "
AMIX
Enter the code
1
keyboard
(1234 by default)
.
Validate
the code
2 3 4
code value
not valid
.
, press key Page 1
ESCAPE " replace the entry procedure code in its original position.
22
ENTER
ESCAPE
displays a code as "masked"
SNA 60