AMIX SNA 60 Manuel D'utilisation page 53

 Final power cut mode
In accordance with decree 98.1143 which stipulates that final power cut is activated , only the fitter can reset the system.
However a more flexible functioning, two possibilities are available and user definable :
 Two power cuts of 10 seconds, then t
given by fitter allows to start again the system.
When user resets SNA, he will have to contact his fitter to undermine the equipment.
 When instruction level is overflown, the power cut is only 10 seconds.
Power cuts and resets are uploaded in historical of equipment.
Select the page to
alarm output
Final power cut mode allowed :
Final power cut
allowed ?
Final power cut forbidden :
Final power cut
forbidden?
 Close the upper plexiglas hood.
 The equipment is ready to work.
AMIX
FUNCTIONING MODE (next)
he power cut will be definitive on the third overflow in the same hour
PAGE
Select the function
4
Final power cut
ENTER
allowed !!!
Leave without
ESCAPE
modify
we remain in
forbidden power cut
Final power cut
ENTER
forbidden !!!
Leave without
ESCAPE
modify
we remain in allowed
power cut
8
"alarm output"
Modify an other
parameter of
page 4
Leave page 4
Modify an other
parameter of
page 4
Leave page 4
21
. A reset code is
Final power cut
allowed ?
Final power cut
forbidden ?
ESCAPE
ESCAPE ESCAPE
ESCAPE
ESCAPE ESCAPE
SNA 60