AMIX SNA 60 Manuel D'utilisation page 62

3°) Use of function : " authorization cut-off if sensor link "
It allows to choose functioning type to carry out at detection of a default on link to sensor.
Two solutions are proposed alternatively according to configuration in progress:
Power cut sector
Occurrence saved
No power cut sector
Occurrence saved
Procedure :
1 - Open the upper hood (plexiglas).
2 - Enter the code Priority 1
3 - Select page 4 using of
4 - Select
5 - Validate using of key
4°) Use of function " relay functioning"
The relay is usually closed and if alarm is triggered, the relay will open.
5°) Use of function "Authorization of final cut-off"
It pemits to choose if the system will block definitly or not after 3 defaults.
Two solutions are proposed alternately depending on configuration in progress.
Final power cut allowed :
Final power cut forbidden :
Procedure :
1 - Open the upper hood (plexiglas).
2 - Enter the code Priority 1 (see annex).
3 - Select page 4 using of
4 - Select
5 - Validate using of key
AMIX
ANNEX 2: SETTING MODES RECAP
Function 6
6
( "choice of functioning mode in case of sensor link default" function)
ENTER
Function 7
Function 8
- Alarm action and system locking after three errors.
- The system continues to carry out cut off of 10s if there is a error.
PAGE
4
8
( "authorization of final cut-off" function )
ENTER
to switch in functioning mode displayed on LCD screen.
to switch in functioning mode displayed on LCD screen.
30
(lead cut, short-circuit).
SNA 60