Maintenance - LawnMaster CLGT6014A Manuel D'utilisation

Masquer les pouces Voir aussi pour CLGT6014A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE

REPAIR
This product does not contain any parts that can be repaired by the consumer.
Contact a qualified specialist to have it checked and repaired.
STORAGE
■ Clean the product as described above.
■ Store the product and its accessories in a dry, frost free place.
■ Always store the product in a place that is inaccessible to children. The ideal storage temperature is
between 50°F (10°C) and 86°F (30°C).
■ We recommend using the original package for storage or covering the product with a suitable cloth to
protect it against dust.
TRANSPORTATION
■ Switch the product off and remove the battery pack before transporting it anywhere.
■ Attach transportation guards, if applicable.
■ Always carry the product by its handles.
■ Protect the product from any heavy impact or strong vibrations which may occur during transportation
in vehicles.
■ Secure the product to prevent it from slipping or falling over.
WARNING
In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before
adjusting, inspecting, or cleaning the grass trimmer.
CLEANING
■ Remove the battery pack.
■ Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air
vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in
water.
■ Wipe off the housing and the plastic components using a damp, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK MAINTENANCE
■ Fully charge the battery before placing in storage.
■ Recharge the battery pack whenever there is a noticeable reduction in the performance. Do not allow
the battery pack to become completely discharged.
■ Do not recharge a battery pack that is already fully charged. Overcharging shortens battery life.
■ Once the battery pack is fully charged, remove the battery from the charger and disconnect charger
from the outlet.
■ Do not store the battery pack on the tool or on the charger.
23

Publicité

Chapitres

Table des Matières
loading

Table des Matières