LawnMaster CLGT6014A Manuel D'utilisation page 11

ASSEMBLY
ATTACHING THE AUXILIARY HANDLE (See Figures 1-2)
■ Loosen the locking knob (5A) from the auxiliary handle.
■ Align the auxiliary handle (6) with the depression on the upper shaft (Fig. 1).
■ Adjust the auxiliary handle to the most comfortable position.
■ Insert the bolt (5B) in the hole on the auxiliary handle, tighten the locking knob (5A) and clamp down
to secure handle (Fig. 2).
2
5A
6
5B
1
Fig 1 Fig 2
NOTE: The auxiliary handle can be mounted from either side of the shaft to accommodate personal
preference of use.
CONNECTING LOWER AND UPPER SHAFTS (See Figure 3)
■ Align the upper shaft with the lower shaft. The triangle-shaped recesses must face each other.
■ Insert the upper shaft into the lower shaft.
■ Fasten both shafts with the locking collar (8) (Fig. 3).
8
Fig 3
11