Connection The Switching Outputs - Conrad 190486 Mode D'emploi

d) Connecting the Switching Outputs
The 16 channel running light control allows you to operate 4 switching outputs (S1 - S4) in
addition to the 16 LEDs or LED groups. You are then able to individually switch the consumers
connected to the 4 outputs on and to switch them off together again via remote control.
Connection is like with the running light LEDs according to the following sketch.

Please observe that you can use the switching outputs only in connection with a
remote control or input signal at the RC input.
The maximum permissible current per switching channel is 2 A.
R21
D3
C7
auflicht_V11
R1
R2
R3
R4
R5
R6
R7
R8
R19
R17
U3
R20
R18
T1
T2
T3
T4
T5
T6
T7
T8
Figure 5
1
Rv
2
3
4
UB
Max. 18V
31