Safety Information - Conrad 190486 Mode D'emploi

6. Safety Information

In case of damage caused by non-compliance with these safety instructions
the warranty / guarantee will become void. We do not assume any responsibility
for consequential damage!
We do not assume any liability for damage to property or personal injury
caused by improper use or the failure to observe the safety instructions! In
such cases the warranty/guarantee is void.
Dear Customer,
These safety instructions are not only for the protection of the product but also for
your own safety and the safety of others. Therefore, read this chapter very carefully
before putting the product into operation!
• The unauthorized conversion and/or modification of the product is prohibited for
safety and approval reasons (CE).
• The product is not a toy and should be kept out of reach of children under 14 years
of age.
• The product must not become damp or wet. The electronics are designed for use
at an operating temperature from -5 °C to +60 °C.
• If you do not have sufficient knowledge yet of how to operate remote-controlled
models and RC systems, please contact an experienced model sportsman or a
model construction club.
• When connecting LEDs or connection lines, ensure secure contact. Loose or
loosened plug connections may cause interferences leading to loss of the model
when using the running light control in a model.
• After connection of LEDs or lines, ensure that soldering did not cause any short
circuit on the board.
• When installing the board, ensure that the soldering contacts are not in any
contact with metal parts to cause short circuits.
• Do not leave packaging material unattended. It may become a dangerous toy for
children.
• Should any questions arise that are not answered with the help of these operating
instructions, please contact us (for contact information see chapter 1) or another
expert.
25