Pc Connection - Conrad 190486 Mode D'emploi

10. PC Connection


The 16-channel running light control can be programmed individually if required.
Reprogramming of the running light functions, however, requires extensive basic
knowledge of the programming language Compact C (simplified C-dialect).
To connect the 16-channel running light control to a PC or notebook, solder on the interface
adapter (Conrad item number 197326) to the prepared connection "USB TO UART". You will
also require a mini USB cable for connection to the PC.
When you have soldered on the interface plug and connected the connection cable, install the
driver included with the interface plug on your PC.
RC
GND
UB
GND
Under www.c-control.de, you will find an IDE developer environment in the area "C-Control
Pro" (C-ControlSetup.exe) and the running light programme for free-of-charge download.
USB TO UART
GND
RXD
TXD
SW 2
SW 1
RESET MODE
R22
U1
R24
5 - 18 VDC
Q1
C11
C10
LED1
R23
U2
L1
16 - K_Lauflicht_V11
Figure 9
R21
D3
C7
R1
R1
37