On Screen Display - Yamaha DSP-A2 Mode D'emploi

On screen display

If you connect your VCR, LD player, video monitor, etc. to this
unit, you can take advantage of this unit's capability to display
program titles, parameter data and information for various
setting changes and adjustments on your video monitor
screen. This information will be superimposed over the video
image.
If there is no video source connected or it is turned off, the
information will be displayed over a blue colored background.
Note: The program titles, parameter data and other
information are also displayed on the display panel of this unit.
Selecting a type of display
You can change the type of display showing various
information on the monitor screen by pressing the ON
SCREEN display key on the remote controller.
Press this key to change the screen to a full or simple display,
or no display at all.
REMOTE CONTROL
TRANSMITTER
(Example)
Full display
Simple display
Goes off after being displayed for
several seconds.
Notes
When making a setting change or adjustment in the SET
MENU mode, or adjusting the speaker balance by using the
test tone, information is fully displayed on the monitor
screen even if another type of display is currently selected.
Information displayed on the monitor screen in this way
cannot be recorded by a VCR.
PREPARATION
A
B
ON SCREEN
C
25