Installing On A Wall Or Ceiling - Yamaha RM-WAP-8 Mode D'emploi

INSTALLING ON A WALL OR CEILING

This unit can be mounted on a wall or ceiling by using the mounting bracket.
Prepare the following.
• This unit
• Mounting bracket (included)
• Commercially available screws × 4
• Commercially available safety wire
CAUTION : Be sure to use screws and safety wires that are appropriate for the
1.
Attach the mounting bracket to the wall or ceiling with four commercially
available screws.
The diameter of the screw holes is five mm.
CAUTION : When attaching to a wall, make sure that the side marked "UP" is at
material of the wall or ceiling.
Using inappropriate hardware may cause the unit or mounting bracket
to fall, resulting in injuries or malfunctions.
the top.
If it is at the bottom, the unit may fall, causing injuries or malfunctions.
Screw
RM-WAP-8 Owner's Manual
11