Operating Structure - PMA KS 90 Mode D'emploi

Mains
Output 3
Output 2 Ü
Output 1
Logic output Ü
Ü Output 2 (contin.): 0(4)...20 mA R
Ü Output 2 (logic):
Ü Logic output:
Functions of the outputs r Con1
Ö L = Local: values changeable via keys, R = Remote: values changeable via digital interface

OPERATING STRUCTURE

After switching on mains (1), the controller is initialized (Test, Con1, Con2), then turns
into the p OPERATING LEVEL 1 and controls the process. The controller is
matched to the control task at the p PARAMETER LEVEL 2 and to the process at
the p CONFIGURATION LEVEL 3. The level transfer is done with key M. For exit
from the operating level, S.I.L. switch LOCK must be open (factory setting). Exit from
the parameter level is via timeout (30 s), too. After keying completely through the
configuration level, transfer is into operating level (2 configuration not changed) or
into initialization (3 configuration has been changed).
+
-
ß 500 [
L
? 500 [) or
0/10 V (R
L
ß 500 [)
0/20 mA (R
L
? 650 [) or
0/13 V (R
L
ß 650 [)
0/20 mA (R
L
+
+
-
+
+
-
a Thermocouples
b Resistance thermometers
c Potentiometric transducers
d DC current
e DC voltage
* Input resistance Ri approx. 170 [
Digital
interface
Digital inputs
Ö
Input 2 *
Earth terminal
+
Universal
input 1
-
3